Insignia NS-32L550A11 User Manual download pdf (Page 14)

NS-32L550A11/NS-37L550A11/NS-42L550A11 32"/37"/42" LCD, 120 Hz 1080p

www.insigniaproducts.com

3 Replace the battery cover.

Aiming the remote control

To aim the remote control:

• Point the remote control towards the remote

sensor on the front of your TV.

Using the remote control holder

Your TV comes with a remote control holder you

can put the remote control in when you are not

using it. You can put the holder on a table or mount

it on a wall.

Programming your universal Insignia remote

control

To program your remote control:

1 Find the codes for the devices you want to

program in “Manufacturers’ codes” on page 46

and write them down or highlight them.

2 Turn on the device (for example, a DVD player)

and, if needed, load media such as a DVD.

3 Press the device button on the TV remote for the

device that you want to program (TV, DVD, STB,

or AUX).

4 Press and hold SET until the red LED blinks

twice, then release.

5 Enter the first five-digit code for the device and

brand that you want to program. The LED blinks

once as each digit is entered. If the code is valid,

the LED blinks twice.

6 Aim the remote at the device and press

(power). The device should turn off. If it does

not, repeat Steps 3 through 5, trying each code

for your brand until you find one that works. If

you cannot find a code that works, see

“Searching for your code” below.

7 Repeat Steps 1 to 5 for the other devices you

want to control. For future reference, write down

each working device code.

Searching for your code

If your device does not respond to the remote

control after trying all codes listed for your brand, or

if your brand is not listed, try searching for your

code.

To search for your code:

1 Turn on the device you want to control.

2 Press the device button on your TV remote

control (TV, DVD, STB, or AUX) once.

3 Press and hold SET until the red LED blinks

twice, then release.

4 Enter 9 9 1. The LED blinks twice.

5 Press the number that matches your device

type.

• 0—Cable converters, video accessories,

satellite receivers

• 1—TVs

• 2—VCRs, DVD players, Blu-ray Disc players

• 3—Audio amplifiers, audio amplifiers/tuners,

CD players

6 Aim the remote at the device and press

(power). The remote sends IR codes from its

library to the selected device, starting with the

most popular code first. If the device responds,

go to Step 8.

7 If the device does not respond, press CH and

the remote tests the next code for that device

type. Continue to press CH until the device

turns off.

Cautions

• Batteries should not be exposed to excessive

heat, such as sunshine, heat registers, or fire.

• Battery chemicals can cause a rash. If the

batteries leak, clean the battery compartment

with a cloth. If chemicals touch your skin, wash

immediately.

• Make sure that batteries are disposed of

correctly. Do not burn or incinerate.

Notes

• Do not mix batteries of different types.

• Do not mix old and new batteries.

• Remove batteries when the charge is depleted.

• If the remote control is not going to be used for

an extended period of time, remove the

batteries.

Notes

• Do not expose the remote control to shock or

liquids.

• Do not use the remote control in an area with

high humidity.

• Do not place the remote control in direct

sunlight.

• Do not place objects, such as furniture, between

the remote control and the remote sensor.

• The remote control may not work if direct

sunlight or bright light shines on the remote

sensor. Either move your TV or change the angle

at which you use the remote control.

Tips

• Different types of walls may require different

types of screws. If you want to wall mount the

remote control holder, make sure that you use

the correct screws for the type of wall. (Screws

are not provided.)

• The remote control holder is shipped with

separate adhesive tape for wall mounting. This

tape may not work with all types of walls. Make

sure that you use the correct tape for the type of

wall.

Tape

Screws (not

included)

Note

If the LED does not blink twice, repeat steps 2 to 4

and try entering the code again.

Note

Press CH to try the previous code.

NS-32L_37L_42L550A11_09-1120_MAN_V2_English.book Page 10 Thursday, January 21, 2010 10:20 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Comments to this Manuals

No comments

Insignia NS-32L550A11 User Manual Page 14

Comments to this Manuals

Related products and manuals for Televisions Insignia NS-32L550A11