Insignia NS-32L550A11 User Manual download pdf (Page 49)

32"/37"/42" LCD, 120 Hz 1080p

www.insigniaproducts.com

Specifications

Design and specifications are subject to change

without notice.

The LED blinks one long blink

while in SET mode

• An entry error has occurred (for example,

wrong button was pressed). Try entering

the sequence again.

When programming the

remote control, the remote

does not control devices or

commands are not working

correctly

• Try all listed codes for the device.

• Make sure the device operates with an

infrared remote control.

No volume on a device

• Refer to “Changing volume lock” on page

12 and make sure the volume is not

locked to a different mode already.

Channels do not change

correctly when directly

entering numbers to change

channels

• If the original remote control required you

to press ENTER to change channels, press

OK/ENTER on your TV remote control

after entering the channel number.

Picture

No picture

• Make sure that the Audio Only option is

set to Off. See “Playing TV audio only” on

page 25.

• Make sure that the video cables are

connected securely to the back of your TV.

See “Making connections” on page 14.

• Adjust the contrast and brightness. See

“Adjusting the TV picture” on page 22.

• Make sure that the correct video mode is

selected. See “Selecting the video input

source” on page 20.

• Make sure that the incoming signal is

compatible.

• Make sure the antenna is connected

correctly. See “Connecting an antenna or

cable TV (no box)” on page 14.

• Check the closed caption settings. Some

TEXT modes can block the screen. See

“Selecting the closed captioning mode”

on page 33.

Good sound but poor color

• Adjust the contrast, color, and brightness

settings. See “Adjusting the TV picture”

on page 22.

Poor picture

• Make sure that the room is not too bright.

Light reflecting off the screen can make

the picture difficult to see.

• If an S-VHS camera or a camcorder is

connected while another connected

device is turned on, the picture may be

poor. Turn off one or more devices.

Horizontal dotted line

• Your TV may be too close to another

electrical device, such as a hair dryer or

neon light. Turn off the device or move

your TV.

“Ghost” or double image

• Obstructions, such as high-rise building or

hills, may be preventing your antenna

from receiving a clear signal. Using a

highly directional antenna may improve

the picture quality.

Snowy picture or noise

• Make sure that the AV and antenna cables

are connected securely.

VGA picture is not stable or

synchronized

• Make sure that you have selected the

correct VGA mode on your computer.

After images appear

• Do not display a still image, such as a logo,

game, or computer image, for an

extended period of time. This can cause a

permanent after-image to be burned into

the screen. This type of damage is not

covered by your warranty.

Problem Solution

Picture has a few bright or dark

spots

• A few bright or dark dots on an LCD screen

is normal. It does not affect the operation

of this TV.

Audio

Good picture but no sound

• Increase the volume.

• Make sure that the sound is not muted.

• Make sure that the correct audio mode is

selected. See “Adjusting sound settings”

on page 25.

No output from one of the

speakers

• Adjust the balance in the Audio menu. See

“Adjusting sound settings” on page 25.

Other

Buttons on the front of the TV

do not work

• Make sure that the Button Lock option is

set to Off. See “Locking control buttons”

on page 30.

• Unplug the power cord, wait a few

seconds, then plug the cord back in and

turn on your TV.

INlink does not work

• Make sure that the device you want to

control is HDMI CEC-compatible.

• Make sure that the HDMI device’s power

cord is connected correctly.

• Make sure that the INlink Control option is

set to On in the INlink menu. See “Using

INlink” on page 38.

• Scan for INlink devices again. See “Using

INlink” on page 38.

• Connect an INlink device using an

HDMI 1.3 cable.

• If it the HDMI cable is disconnected then

reconnected or if the power is turned off

scan for INlink devices again. See “Using

INlink” on page 38.

Analog standard NTSC

Digital standard ATSC, 8-VSB, Clear-QAM

Photo standard JPEG format

Screen size NS-32L550A11: 32"

NS-37L550A11: 37"

NS-42L550A11: 42"

Channel coverage VHF: 2-13

UHF: 14-69

CATV: Mid band - A-8 ~ A-1, A ~ I

Super band - J ~ W

Hyper band - AA ~ ZZ, AAA, BBB

Ultra band - 65 ~ 94, 100 ~ 135

Power source AC 120 V ~ 60 Hz

Power consumption 32": 150W with TV on

37": 150W with TV on

42": 220W with TV on

<1W in Standby mode

Audio power 32": 10 W + 10 W internal speaker

37"/42": 12 W + 12 W internal speaker

S-Video input (1) Y: 1 V (p-p), 75 ohm, negative sync

C: 0.286 V (p-p) (burst signal), 75 ohm

AV input (1) Video: 1 V (p-p), 75 ohm, negative sync

Audio: 500 mV (rms)

Problem Solution

NS-32L_37L_42L550A11_09-1120_MAN_V2_English.book Page 45 Thursday, January 21, 2010 10:20 AM

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

Comments to this Manuals

No comments

Insignia NS-32L550A11 User Manual Page 49

Comments to this Manuals

Related products and manuals for Televisions Insignia NS-32L550A11